18 channel power supply distribution box, CCTV power supply
Industrial power supply, security monitoring power, instrumentation, LED centralized power supply etc. |
• Universal full range AC input
• Protections: Short circuit / overload / over voltage /
• Natural air
• 100% full load burn-in test
• 2-year warranty |
|
Output |
Model |
AD-S1210018CH |
AD-S1210018CH |
AD-S1210018CH |
AD-S1210018CH |
AD-S1210018CH |
AD-S1210018CH |
|
DC voltage |
12V |
|
Rated current |
10A |
12A |
15A |
20A |
25A |
30A |
|
Current range |
0 ~ 10A |
0 ~ 12A |
0 ~ 15A |
0 ~ 20A |
0 ~ 25A |
0 ~ 30A |
|
Rated power |
120W |
150W |
180W |
240W |
300W |
360W |
|
Ripple&Noise |
80mVp-p |
120mVp-p |
120mVp-p |
120mVp-p |
120mVp-p |
120mVp-p |
|
Voltage regulation |
4.75 ~ 5.5V |
7.13 ~ 8.3V |
8.55 ~ 9.9V |
11.4 ~ 13.2V |
14.25 ~ 16.5V |
22.8 ~ 26.4V |
|
Voltage accuracy |
±2.0% |
±1.0% |
±1.0% |
±1.0% |
±1.0% |
±1.0% |
|
Linear regulation |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
|
Load regulation |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
|
Sart,rise,hold time |
500ms,20ms/230VAC 500ms,20ms/115VAC 30ms/230VAC,25ms/115VAC(full load) |
|
Input |
Voltage range |
85 ~ 132VAC/176 ~ 264VDC(switch) or 248 ~ 373VDC |
|
Frequency range |
47-63Hz |
|
Efficiency rate |
80% |
81% |
81% |
83% |
84% |
86% |
|
Input current |
2A/115VAC 1.2A/230VAC |
|
Surge current |
Cold boot:36A |
|
Leakage current |
<2mA/240VAC |
|
Protection |
Over load |
110% ~ 150% of rated output power rate |
|
Protected mode: hiccup mode, the load of an abnormal condition can be automatically restored after removed |
|
Over voltage |
5.75 ~ 6.75V |
8.6 ~ 10.1V |
10.4 ~ 12.2V |
13.8 ~ 16..2V |
17.25 ~ 20.25V |
27.6 ~ 32.4V |
|
Protected model: close output, output power can be restored to normal after restart |
|
Environment |
Working temperature |
-20 ~ +60℃ |
|
Operate Humidity |
20 ~ 90%RH,no condensation |
|
Storage temperature, humidity |
-40 ~ +85℃,10 ~ 95%RH |
|
Temperature coefficient |
±0.03%/℃(0 ~ 45℃) |
|
Vibration resistance |
10 ~ 500Hz,2G10 mintue/ cycle,X,Y,Z axis/60 mintues |
|
Safety &electromagnetic compatibility |
Safety standard |
UL60950-1,CB(IEC60950-1),CCC GB4943.1:2011 passed |
|
Withstand voltage |
I/P ~ O/P:3KVDC I/P ~ FG:2KVDC 0/P ~ FG:0.5KVDC |
|
Insulation resistance |
I/P ~ O/P , I/P ~ FG , 0/P ~ FG:100M Ohms/500VDC/25℃/70%RH |
|
Electromagnetic compatibility &emission |
Comply to EN55022(CISPR22) ClassB,EN61000-3-2,3 |
|
Electromagnetic compatibility &noise immunity |
Comply to EN61000-4-2,3,4,5,6,11,EN55024,EN61000-6-1,A light industry level |
|
Other |
MTBF |
≥320.7Khrs MIL-HDBK-217F(25℃) |
|
packing |
|
|
Remark |
1. 1 If not otherwise stated, all specification parameters are input to 230VAC, rated load, for measurements under 25 ℃ 70% RH ambient temperature.
2. 2 DC voltage measurements: at 50% load condition, the plug terminal end measurements.
3. 3 Ripple and noise measurement methods: using a 12 "twisted pair terminated with a 0.1uf & 47uf parallel capacitor for measurements at 20MHZ bandwidth.
4. 4 Accuracy: includes set up tolerance, line regulation and load regulation.
5. 5 linear adjustment rate measurement methods: at rated load from low voltage to high voltage testing.
6. 6 load regulation measurement methods: from the rated load from 0% to 100%.
7. 7 in accordance with the requirements GB4943.1 power applies only to an altitude of 2000 meters the following areas and the safe use of non-tropical climates.
8. 8 power supply should be considered as part of the system components, the need to combine the terminal equipment related to electromagnetic compatibility confirmed |
Request A Quote
